Motion

The NEO Vortex is a high-power, high-performance, and high-resolution sensored brushless motor that is compatible with the REV ION System. It features a dockable controller interface that can be mounted directly to the SPARK Flex Motor Controller or our...

The Vortex Shaft - MAXSwerve Integrated Key is compatible with the REV ION System and gives users the ability to drive a MAXSwerve Module without the need for the MAXSwerve Key. This eliminates a potential point of failure in the MAXSwerve since the key...

The Vortex Shaft - 20DP Gear - 7T is compatible with the REV ION System and offers users the unique ability to achieve substantial gear reductions directly from the motor. This gear features a 7T 20DP design that is typically too small for an 8mm keyed...

The Vortex Shaft - Falcon Compatible Spline is compatible with the REV ION System and gives users the ability to drive components that have a falcon spline bore. *Falcon is not a REV trademark. Featuring a 1/2in hex section that drives the shaft and a...

The 8mm Vortex Shaft, compatible with the REV ION System, empowers you to utilize the NEO Vortex Brushless Motor with any 8mm keyed shaft component. This interchangeability also means that the NEO Vortex matches the output of a NEO Brushless Motor V1.1,...

The Vortex MAXPlanetary Input Kit is compatible with the REV ION System and gives users the ability to mount a MAXPlanetary Gearbox directly to your NEO Vortex Brushless Motor and SPARK Flex Motor Controller. Working seamlessly with the MAXPlanetary...

The NEO Vortex Solo Adapter, allows teams to seamlessly integrate the NEO Vortex Brushless Motor with a SPARK MAX Motor Controller. This adapter breaks out the motor sensor connector and phase wire connections. While the NEO Vortex Solo Adapter allows...

The 3in MAXSwerve Module is the smallest and lightest swerve module designed for FRC Teams. Leveraging many parts of the REV ION System, MAXSwerve aims to reduce the complexity traditionally associated with swerve drivetrains. The module features a 3in...

An individual cartridge for the MAXPlanetary System. This cartridge is a 9:1 gear reduction.With a 9:1 reduction in a single stage cartridge you will save significant space and weight in your builds that demand the higher reduction!The MAXPlanetary...

The 2 Motor Gearbox - Through Bore is compatible with the REV ION System. This two motor into one output gearbox allows the user to adjust the gear ratio by changing pinion and cluster gear (12:60, 18:54, 24:48, or 36:36). The output shaft is 1/2in...

Designed for use with the REV ION System and with an efficient right-angle configuration, the MAX 90 Degree Gearbox offers a robust and high-performance solution to building a more compact robot. Connect the MAX 90 Degree Gearbox to the MAXPlanetary...

ION #25 Sprockets are compatible with the REV ION System and designed for use with #25 Roller chain. #25 Plate Sprockets: Featuring MAXSpline and a 2in bolt circle that patterns outward radially, allowing for bolting to structure easily. #25 Hub...

20DP Gears are compatible with the REV ION System and come in a wide range of sizes and bores. Larger gears feature #10 clearance holes arranged in a 2-inch bolt circle pattern and MAXTube mounting pattern. A notch on the bore provides an easy...

20DP Gears are compatible with the REV ION System and come in a wide range of sizes and bores. Larger gears feature #10 clearance holes arranged in a 2-inch bolt circle pattern. A notch on the bore provides an easy visual indicator to ensure gears on the...

The MAXPlanetary Base Kit (REV-25-2109) is the entry point into using the MAXPlanetary System. This base kit includes a universal input stage, 1/2in hex socket output, hardware pack, 8mm keyed input coupler kit, and a 1/2in rounded hex shaft. Purchase a...

The REV UltraPlanetary Gearbox Kit is the entry point into using the REV UltraPlanetary System. The kit comes with UltraPlanetary Cartridges to support six different final gear reductions ranging from nominally 3:1 to 60:1 allowing for the right amount...

ION Grip Wheels are compatible with the REV ION System and come in a wide range of sizes, durometers, and bores. Larger wheels contain the MAXSpline bore, but can be adapted to other bores with a separate MAXHub. Wheels with spokes have a bolt...

ION Traction Wheels are compatible with the REV ION System and come in a wide range of sizes, durometers, and bores. Larger wheels contain the MAXSpline bore, but can be adapted to other bores with a separate MAXHub. Wheels with spokes have a bolt circle...

ION Omni Wheels are compatible with the REV ION System and come in a wide range of sizes, all featuring the MAXSpline bore. Other bores are possible with a separate MAXHub. Rollers for each wheel size are unique, which ensures perfectly circular wheels...

ION Compliant Wheels are compatible with the REV ION System and come in a wide range of sizes, durometers, and bores. Larger wheels contain the MAXSpline bore, but can be adapted to other bores with a separate MAXHub. The radial spoke profile allows for...

MAXSpline Spacers are compatible with the REV ION System and can be used on the shaft as a spacer; they also work as spacers between wheels and sprockets, etc. Specifications Material: POM (Acetal/Delrin) OD: 1.50in Weights &...

#10 Spacers are compatible with the REV ION System and are an accurate way to space structural components like plates, brackets, or tubes apart on #10 screws. Can also be used to to space motion components like gearboxes away from their mounting...

1/2in Rounded Hex Shafts are compatible with the REV ION System and are a ready-to-use length of hex shaft that have been cut to length and have the ends tapped. The ends are tapped #10-32 in order to accept a screw and washer or shaft collar. The 1/2in...

#10-32 Standoffs are compatible with the REV ION System and provide spacing for mounting key items on your robot. These standoffs are tapped on each end for a #10-32 thread and have a 3/8in flat to flat dimension, similar to a #10-32 nut...

An individual cartridge for the MAXPlanetary System. This cartridge is a 5:1 gear reduction. The MAXPlanetary System is a cartridge-based modular planetary gearbox designed from the ground up for NEO-class motors. The design of the MAXPlanetary has been...

An individual cartridge for the MAXPlanetary System. This cartridge is a 4:1 gear reduction. The MAXPlanetary System is a cartridge-based modular planetary gearbox designed from the ground up for NEO-class motors. The design of the MAXPlanetary has been...

An individual cartridge for the MAXPlanetary System. This cartridge is a 3:1 gear reduction. The MAXPlanetary System is a cartridge-based modular planetary gearbox designed from the ground up for NEO-class motors. The design of the MAXPlanetary has been...

RT25 Pulleys can be combined with RT25 Belts to create a power transmission system compatible with the pitch of the ION Build System. RT25 belts and pulleys are comparable to the belts and pulleys that teams are used to using. Belts are lighter than...

RT25 Belts are toothed belts with a 1/4in pitch are compatible with the REV ION System. These belts are comparable in strength to the belts that teams are used to using while working on the pitch of the ION build system. Belts are lighter than...

The NEO Pinions are used for transferring power from a NEO Brushless Motor to a mechanism. These pinions come in three different types; either gear, sprocket, or pulley. The pinion gears are compatible with 20DP gears. The pinion sprocket is...

ION Flap Wheels are compatible with the REV ION System and feature a 1/2in Hex Bore. They are used on intakes to pick up irregular gamepieces, playing a similar role to compliant wheels. While compliant wheels provide compliance with minimal slip between...

The Elevator Bearing Blocks family offers reliable, versatile solutions for creating linear motion in elevator systems using MAXTube. Both the original Elevator Bearing Block and the Clamping Elevator Bearing Block provide teams with the flexibility to...

The 3in MAXSwerve V1 to V1.1 Upgrade Kit brings a simplified motor keying approach to the main drive motor allowing for easier installation on the 3in MAXSwerve Module (REV-21-3005). A new version of the Encoder Bridge is included to adapt to the use of...

The MAXLift #25 Chain Attachment Plate is a durable yet lightweight aluminum bracket designed for seamless use with the REV ION system within the MAXLift family of products. It simplifies mounting and assembly for elevator and lift systems. Featuring...

ION Servo Accessories allow for easy integration into REV ION System. Mount a hobby sided servo, such as the REV Smart Robot Servo, on a 1/2in pitch. Using the adapters, you can convert a servo to a 1/2in Hex shaft for use with all other...

The 8mm Shaft Spacer is compatible with the REV ION System and is a convenient way to space pinions and gears along the shaft of the NEO Brushless Motor. The 8mm Shaft Spacer is bigger than the 1/2in Hex Adapter and can help keep...

#10-32 Shaft End Screw V1 and V2 are compatible with the REV ION System and are used to retain parts on any ION hex shaft instead of shaft collars. 1/2in Rounded Hex Shafts in various lengths are available and come tapped with #10-32 holes. The...

The 3in MAXSwerve Module - Kraken Input Kit is a versatile add-on designed to integrate the Kraken X60 motor with the 3in MAXSwerve Module. This kit features a modified 14T pinion gear for seamless power transfer with the 8mm - 15T spline. It includes a...

The MAXPlanetary Kraken X44 & Minion Input Kit is a comprehensive solution for adapting Kraken X44 or Minion motors to the MAXPlanetary system. This kit includes the [REV-21-4444] MAXPlanetary Kraken X44 & Minion Adapter Plate, designed with...

GT2 3mm Pitch Belts are compatible with both the REV ION System and the REV DUO System. These belts go hand in hand with GT2 timing pulleys. Use belts and pulleys in tight to fit areas where adjustment is difficult. Specifications Pitch: 3mm Width:...

Bearings 1/2in Hex Bearing - Flanged - 1.125in OD - 4 Pack (REV-21-1915-PK4) This flanged bearing provides a reliable way to locate and support a 1/2in hex shaft or 1/2in rounded hex shaft while it rotates. The flange ensures secure installation in...

The MAXLift Bearing Blocks are integral components of the MAXLift system, providing teams with a robust and space-efficient solution for building high-performance elevator assemblies. With the main blocks being designed around billet aluminum...

The 3in MAXSwerve Spiky Wheel - Hub and Tread Bundle includes everything needed to outfit your MAXSwerve-equipped robot with Spiky wheels for enhanced performance. The bundle contains four (4) balanced aluminum hubs, eight (8) Spiky split treads, and...

The 3in MAXSwerve Spiky Wheel Aluminum Hub is a durable replacement or backup hub designed specifically for the MAXSwerve system. Pair it with a fresh Spiky Wheel Tread and #10-32 3/8in button head screws for a high performance drivetrain. For quick full...

The 3in MAXSwerve Spiky Wheel Tread is designed for superior grip and performance in competitive robotics. Made from injection-molded thermoplastic polyurethane (TPU) with a Shore A durometer of 95, this tread offers an improved coefficient of friction...

#35 Connecting Links are compatible with the REV ION System and are design for use with #35 Roller Chain. Use a #35 Connecting Link to connect two ends of chain to create a loop. Specifications Material: Steel Size: #35 Pitch: 0...

#35 Roller Chain is compatible with the REV ION System. This product is a single strand of #35 Roller Chain for use with ION #35 Sprockets. Use a #35 Connecting Link to connect two ends of chain to create a loop. Specifications Material:...

The #35 Chain Turnbuckle is compatible with the REV ION System. It is designed to adjust the length of a #35 Roller Chain by replacing a few links in a run and also allows the user to tension the chain by adjusting the turnbuckle. The...

The Vortex Shaft - 15T Spline, compatible with the REV ION System and gives users the ability to drive inputs that have a 8mm diameter involute 15T spline. Compatible with SplineXS shaft components. Featuring a 1/2in hex section that drives the shaft and...

The 1/2in Hex Bore Shaft Collars are used to prevent gears, sprockets, wheels, and other parts from sliding out of place on a 1/2in hex shaft. All REV 1/2in Hex Bore Shaft Collars feature a boss, or bump out, to contact the inner race of bearings that...

The Linear Actuator 2in Input Shaft is compatible with the REV ION System and enables the (REV-21-2735) Linear Actuator input to easily attach to various outputs like the (REV-25-2741) MAX 180 Degree Gearbox. The Linear Actuator 2in Input Shaft is...

The MAXSpline Pillow Block is compatible with the REV ION System and allows for MAXSpline Shaft (REV-21-2520) to be rigidly mounted to any surface featuring a 2in mounting hole pattern. This enables easy attachment to rotating high torque...

Designed for teams requiring higher load capacity in chain-driven systems, the ION #35 Sprockets come in three versatile options, each compatible with the REV ION Build System: #35 Hub Sprockets - 1/2in Hex: Featuring a 1/2in hex bore (rounded for the...

The MAXPlanetary 15T Spline Input Coupler's (REV-21-2138) ISO standard 8mm 15T spline is compatible with the SplineXS (Kraken and Minion) shaft spline. This input coupler integrate into the MAXPlanetary System without needing to modifying motor shafts...

The 550 Motor Pinions are used for transferring power from a 550 class motor, like the HD Hex Motor or NEO 550, to a mechanism.  The UltraPlanetary Pinion is used with UltraPlanetary Gearbox System. The pinions are press fit onto the 0.125”...

The 550 Motor Pinions are used for transferring power from a 550 class motor, like the HD Hex Motor or NEO 550, to a mechanism.  The UltraPlanetary Pinion is used with UltraPlanetary Gearbox System. The pinions are press fit onto the 0.125”...

The 550 Motor Pinions are used for transferring power from a 550 class motor, like the HD Hex Motor or NEO 550, to a mechanism.  The UltraPlanetary Pinion is used with UltraPlanetary Gearbox System. The pinions are press fit onto the 0.125”...

The UltraPlanetary 550 Motor Plate works with the REV HD Hex Motor, REV NEO 550 Brushless Motor, and other 550 class motors.  Specifications Module: 0.55 Pressure Angle: 20° Materials: Sintered Steel Weight: 33.5 g (0.074...

The REV UltraPlanetary Female 5mm Output V2 is the output stage of the REV UltraPlanetary system. With two different ways to transfer power, the output stage allows designers to choose the option best suited for the application. The V2 version of the...

The UltraPlanetary 1/2in Hex Adapter is designed to face mount to the UltraPlanetary gearbox and provide a convenient 1/2in hex output shaft that is commonly used in the FIRST Robotics Competition. The recommended hardware for mounting the...

The MAXSpline Shaft Collar is compatible with the REV ION System and provides a simple way to retain items in place on the MAXSpline Shaft. The shaft collar can also be bolted to structure to constrain the axial alignment of MAXSpline Shaft when used in...

#10-32 Ball Joint Rod Ends are compatible with the REV ION System. The left-handed threaded rod ends tighten when turned counterclockwise.  Specifications Type: Stud-type Rod End Ball Joint Thread Size: 10-32 Material:...

#10-32 Ball Joint Rod Ends are compatible with the REV ION System. Right-hand threaded rod ends tighten when turned clockwise. Specifications Type: Stud-type Rod End Ball Joint Thread Size: 10-32 Material: Steel Documentation ION Build...

The 8mm Shaft Spacer is compatible with the REV ION System and is a convenient way to space pinions and gears along the shaft of the NEO Brushless Motor. The 8mm Shaft Spacer is bigger than the 1/2in Hex Adapter and can help keep...

1/2in Hex Shaft Spacers are compatible with the REV ION System and can be used on the shaft as a spacer; they also work as spacers between wheels and sprockets, etc. Specifications Material: POM (Acetal/Delrin) OD: 0.72in Weights &...

1/2in Hex Shaft Spacers are compatible with the REV ION System and can be used on the shaft as a spacer; they also work as spacers between wheels and sprockets, etc. Specifications Material: POM (Acetal/Delrin) OD: 0.72in Weights &...

1/2in Hex Shaft Spacers are compatible with the REV ION System and can be used on the shaft as a spacer; they also work as spacers between wheels and sprockets, etc. Specifications Material: POM (Acetal/Delrin) OD: 0.72in Weights &...

1/2in Hex Shaft Spacers are compatible with the REV ION System and can be used on the shaft as a spacer; they also work as spacers between wheels and sprockets, etc. Specifications Material: POM (Acetal/Delrin) OD: 0.72in Weights &...

MAXSpline Shaft Endcaps are compatible with the REV ION System and transform your MAXSpline Shaft extrusion into a live axle driven by a 1/2in Hex shaft. MAXSpline Shaft Endcaps come in two different materials: a durable plastic version and an upgraded...

The MAXSpline Shaft Bearing Block Kit and MAXSpline Bearings are compatible with the REV ION System and are perfect for using MAXSpline Shaft in a live axle application or any other similar sized rotational needs. Effortlessly mounting to REV's hole...

The MAXSpline Shaft Bearing Block Kit and MAXSpline Bearings are compatible with the REV ION System and are perfect for using MAXSpline Shaft in a live axle application or any other similar sized rotational needs. Effortlessly mounting to REV's hole...

The MAXSpline Shaft Bearing Block Kit and MAXSpline Bearings are compatible with the REV ION System and are perfect for using MAXSpline Shaft in a live axle application or any other similar sized rotational needs. Effortlessly mounting to REV's hole...

The MAXSpline Shaft Bearing Block Kit and MAXSpline Bearings are compatible with the REV ION System and are perfect for using MAXSpline Shaft in a live axle application or any other similar sized rotational needs. Effortlessly mounting to REV's hole...

The MAXSpline Shaft Bearing Block Kit and MAXSpline Bearings are compatible with the REV ION System and are perfect for using MAXSpline Shaft in a live axle application or any other similar sized rotational needs. Effortlessly mounting to REV's hole...

The MAXSpline Shaft Bearing Block Kit and MAXSpline Bearings are compatible with the REV ION System and are perfect for using MAXSpline Shaft in a live axle application or any other similar sized rotational needs. Effortlessly mounting to REV's hole...

The Gear Ratio Upgrade Kit is compatible with the REV ION System and works with the 3in MAXSwerve Module and comes with two additional motor pinions and four additional spur gears that create five new extra high speed ratios to make your drive faster and...

The MAXPlanetary 1/2in Hex Input Coupler is compatible with the REV ION System. The coupler attaches to the end of a hex shaft, securely held in place by a screw, enabling the MAXPlanetary to be powered by a hex shaft on its input side. Its significance...

The MAX 180 Degree Gearbox is compatible with the REV ION System and is designed to give you extra flexibility in your robot construction. Engineered to let you flip your motor 180 degrees to the output, optimizing space for tighter packaging. This...

The Linear Actuator - 12in Stroke is compatible with the REV ION System. This electric linear actuator aligns seamlessly with FRC-legal motors and gearboxes while adhering to FRC hardware and mounting standards. Designed for adaptability, this...

With an efficient right-angle configuration, the Ultra 90 Degree Gearbox offers a robust solution to building a more compact robot. The Ultra 90 Degree Gearbox allows you to connect the UltraPlanetary Gearbox and the HD Hex Motor (REV-41-1600)...

MAXHubs are compatible with the REV ION System and provide a way to transfer torque to a MAXSpline bore from shafts of various shapes and sizes. Other hub variants allow for other bores or mount holes to populate within an existing MAXSpline...

An individual cartridge for the UltraPlanetary System. This cartridge is nominally a 5:1 gear reduction. The UltraPlanetary System is a cartridge based modular gearbox designed to handle the rigors of the competition and the classroom. Building on...

An individual cartridge for the UltraPlanetary System. This cartridge is nominally a 4:1 gear reduction. The UltraPlanetary System is a cartridge based modular gearbox designed to handle the rigors of the competition and the classroom. Building on the...

An individual cartridge for the UltraPlanetary System. This cartridge is nominally a 3:1 gear reduction. The UltraPlanetary System is a cartridge based modular gearbox designed to handle the rigors of the competition and the classroom. Building on the...

Master link (connecting link) for #25 chain. Use a master link to connect two ends of chain to create a loop. Specifications Material: Steel Size: #25 Pitch: 0.25in CAD & Drawings REV-41-1366 STEP File REV-41-1366 Onshape REV-41-1366 Drawing 

Single Strand #25 roller chain for use with #25 sprockets. Use #25 Master Links for #25 chain connect two ends of chain to create a loop. Specifications Material: Steel Size: #25 Pitch: 0.25in

The 3in MAXSwerve Aluminum Wheel was designed for the 3in MAXSwerve Module. You can attach your favorite tread material to this wheel. REV recommends rough top conveyor belting. A cut template for the wheel tread is available below...

The 2 Motor Drivetrain Gearbox - Through Bore Bundle contains the REV-21-2190 base kit, the 20DP Gears needed for a 6in wheel ratio, and 20DP NEO Pinions Gears (10T, 11T, 12T) for multiple speed options. If a 4in or 5in wheel gear ratio is needed,...

The #25 Chain Turnbuckle is compatible with both the REV ION System and REV DUO System. It is designed to adjust the length of a #25 Chain by replacing a few links in a run and also allows the user to tension the chain by adjusting...

These JST PH 6-pin Extension Cables are intended to extend the reach of sensor cables without having to cut and splice wires. Specifications Length: 30cm Notes As of 01/10/2024, the length on this product page has been corrected from 15cm to 30cm...

The 3in MAXSwerve Module Wheel Hardware Pack was designed for the 3in MAXSwerve Module. This kit is for FRC teams looking to streamline their wheel maintenance at competitions. With this kit, teams can pre-build their wheel assemblies, making...

The 3in MAXSwerve Plastic Wheel was designed for the 3in MAXSwerve Module. Specifications Material: Glass-Filled Nylon & TPR Weight: 79g (0.17lbs) Documentation ION Build System Guide 3in MAXSwerve Module Build Guide CAD &...

Connect the REV Through Bore Encoder directly to the SPARK MAX Data Port using this adapter. This adapter connects the Absolute Duty Cycle output of the Through Bore Encoder to the correct SPARK MAX Data Port pins, leaving the incremental quadrature...

MAXSpline Bearing Blocks are compatible with the REV ION System. Quickly add bearing support to any location on REV ION extrusion without the need for precision machining. Can also be used in a west coast style drivetrain to add center wheel drop while...

MAXSpline Bearing Blocks are compatible with the REV ION System. Quickly add bearing support to any location on REV ION extrusion without the need for precision machining. Can also be used in a west coast style drivetrain to add center wheel drop while...

This product is a 6:1 Ratio Gear Bundle for the 2 Motor Gearbox - Through Bore. Purchasing a Base Kit and Ratio Gear Bundle are both required to assemble a full gearbox, visit the 2 Motor Gearbox - Through Bore (REV-21-2099) page to learn...