Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
End Cap Bearing - 8 Pack
REV-41-1322-PK8CAD$9.45The End Cap Bearing is used with the 5mm hex shaft recommended for the DUO Build System 15mm Extrusion to provide a low friction rotating shaft support. This bearing is intended to seat in any of the... -
Barb for Polyurethane Hollow Belt - 8 Pack
REV-41-1165-PK8CAD$11.55Use these barbs with our Polyurethane Hollow Belt to join the ends and make custom length belts quickly and easily. CAD & Drawings REV-41-1165 Drawing -
15mm Corner Brackets
CAD$8.40 - CAD$17.50This 90 degree inside corner bracket (REV-41-1320-PK8) is used with the DUO Build System 15mm Extrusion. These plastic brackets have webbing to strengthen the corner and includes a set of alignment... -
Zip Ties - Black - 160mm - 50 Pack
REV-41-1161-PK50CAD$7.00Nylon Zip Ties with rounded edges to prevent snagging. Length is idea for cable management and many other uses. Specifications 160mm long Quality nylon construction 18lb. tensile strength -
Through Bore Bearings
CAD$7.00 - CAD$10.85Through Bore Bearings are compatible with the REV DUO System and are used with 5mm Hex Shafts recommend for the DUO Extrusion System to provide a low friction rotating shaft support. These low... -
M3 X 8MM T-Slot Screw - 25 Pack
REV-41-1907-PK25CAD$12.95Custom zinc plated steel drop-in hardware to work with the 15mm Extrusion system. Length measured from tip to underside of hex cap. Specifications Thread Pitch: M3 x 0.5 Material: Corrosion... -
Aluminum Servo Horn V2
REV-41-1828CAD$10.85The Aluminum Servo Horn V2 is compatible with the REV Smart Robot Servo and any other servos with a standard 25T spline. Updates from the original Aluminum Servo Horn include additional tapped M3... -
Small Pulley Bearings - 10 Pack
REV-41-1368-PK10CAD$18.90These v-groove bearing pulleys fit on an M3 x 16mm Hex Cap Screw and can be mounted directly onto extrusion. Use with 15mm Linear Motion Kits and a high tensile strength no-stretch string, such as... -
Rounded UltraHex Shaft - 36in Long
REV-41-3205CAD$18.20The Rounded UltraHex Shaft is compatible with the REV ION System and allows teams to adapt the REV 5mm Hex Shaft family of products to 0.5in Hex applications. It can also be used as a coupler to... -
Hook and Loop Fastener - 13.5mm x 2m
REV-41-1373CAD$10.85Double-sided hook and loop tape allows you to cut to desired custom lengths. Reusable, secure hold. Specifications 13.5mm width x 2m length -
Servo Bundle V2
REV-45-3248CAD$560.00The Servo Bundle V2 is a one stop shop for getting up and running with the new Smart Robot Servo V2. Included in this bundle are all the major accessories for programming and powering using servos,... -
5.5mm Nut Driver
REV-41-1119CAD$11.55Small electronics sized 5.5mm Nut Driver with rubberised grip fits M3 hex cap bolts and nuts. Specifications Socket Depth: 15.8mm Dimensions: 16.2cm x 2cm x 2cm (6.38in x 0.79in x 0.79in) Weight:... -
Ferrite Cable Clip - 4 Pack
REV-39-1224-PK4CAD$7.00These Ferrite Cable Clips help prevent electromagnetic interference (EMI). They can be clipped around USB and other data cables that are being used in electrically noisy environments. -
Digital LED Indicator - Red/Green - 4 Pack
REV-31-2010-PK4CAD$20.65The Digital LED Indicator is a LED signal module that is digitally controlled (active low) and offers three colors: red, green, and amber. The Digital LED Indicator is designed to directly interface... -
XT30 Connectors - 5 pairs
REV-31-1399-PK5CAD$17.50Use these connectors to create your own custom length power wires. The XT30 Connector uses a solder cup instead of a crimping tool to connect the contact to a wire. -
Sensor Splitter Cable - 2 Pack
REV-31-1386-PK2CAD$8.40The analog and digital ports on the Control Hub and Expansion Hub combine two sensor inputs into one connector to save space. Single sensors plugged directly into these ports will work, but they will... -
Potentiometer
REV-31-1155CAD$21.35This 10K potentiometer can be used as an analog sensor with the Control Hub or Expansion Hub. This potentiometer has a 270 degree range of motion and can be mounted to any REV DUO brackets with the... -
Through Bore Encoder V2
REV-11-3174CAD$67.20The REV Through Bore Encoder V2 provides precise, reliable shaft position measurement with both incremental (ABI quadrature) and absolute (pulse-width) outputs. Its ½" hex through bore mounts easily... -
45mm x 15mm C Channels
CAD$6.30 - CAD$43.40REV 45mm x 15mm C Channel has a 45mm x 15mm rectangular profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsional strength... -
5mm Hex Shafts
CAD$17.50 - CAD$32.555mm Hex Shafts are compatible with the REV DUO System. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable set screws. REV shafts are made out of...