Competition

The SPARKmini Motor Controller is an inexpensive in-line brushed DC motor controller designed to offer the same performance characteristics as the Control Hub (REV-31-1595) or Expansion Hub (REV-31-1153) motor ports in a small 60mm x 22mm footprint...

Add this switch between your battery and Expansion Hub to have convenient on/off control of your robot. We recommend mounting the switch slightly recessed from the outside of your robot so that it's not accidentally turned off by another robot during a...

The REV Robotics Expansion Hub is a low-cost educational device that can communicate with any computer (commonly the REV Robotics Control Hub  or Driver Hub) to provide the interfaces required for building robots and other mechatronics. The...

REV 45mm U Channel has a 45mm x 45mm square profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsion strength is required. On the sides of the channel is the Extended Motion...

This 8mm x 12mm x 3.5mm Flanged Bearing, when paired with the 5mm Hex to 8mm Round Bearing Insert (REV-41-1528), allows teams to support our 5mm hex shaft with a robust low friction bearing.   We recommend mounting the bearing into...

REV 45mm U Channel has a 45mm x 45mm square profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsion strength is required. On the sides of the channel is the Extended Motion...

The HD Hex series motors and gearboxes feature integrated encoders and power that plug right into the Control Hub (REV-31-1595) and Expansion Hub (REV-31-1153). The gearbox options feature 5mm Hex output or coupler making it easy to connect gears,...

This product has been discontinued as of 07/15/2024 and replaced with (REV-31-2983) REV USB PS4 Compatible Gamepad. The Etpark Wired Controller is a legal gamepad for the FIRST Tech Challenge program. This controller...

The NEO 550 Brushless Motor is a member in the NEO family of brushless motors. Its output power and small size are specifically designed to make NEO 550 the perfect motor for intakes and other non-drivetrain robot mechanisms. Mounting holes and pilot...

The REV Through Bore Encoder is specifically designed with the end user in mind, allowing teams to place sensors in the locations closest to the rotation that they wish to measure. This rotary sensor measures both relative and absolute position through...

The NEO Brushless Motor is the first brushless motor designed to meet the unique demands of the FRC community. NEO offers an incredible power density due to its compact size and reduced weight. As it is designed to have similar performance...

The Core Hex Motor is a FTC legal motor that features a 90 degree orientation and a female output shaft for maximum flexibility and ease of use. Insert any REV standard 5mm hex shafts into or through the Core Hex motor to create custom length...

Made to fit sockets that are found in various REV kits like the FTC Starter Kit V3 and the EDU Kit V2. Kit Contents  *exact product may vary from photo shown  SKU  PRODUCT NAME  PRODUCT QUANTITY  PACK...

The REV 4-Pin JST to PWM Sensor Adapter Cable allows for seamless connection of REV Robotics Sensors like the Magnetic Limit Switch and Potentiometer to the FRC Control System. Please note that this cable will not work for I2C type sensors. REV...

This 5V WS2812B Addressable RGB LED Strip is compatible with the REV Blinkin LED Driver (REV-11-1105). Each LED contains an integrated driver IC and three LEDs; a red, green, and blue LED. Each individual LED can be controlled to create colorful patterns...

This Servo Shaft Adapter makes it possible to drive a 5mm hex shaft with any 25T output servo including the Smart Robot Servo. The adapter attaches to the servo spline like any common servo horn and accepts a 5mm hex shaft on the opposite end. This...

Reliability meets convenience for FTC teams! The HD Hex series motors and gearboxes all features integrated encoders and power that plug right into your REV Expansion Hub or Control Hub. Our gearboxes all feature a 5mm hex output shaft makes it easy to...

Reliability meets convenience for FTC teams! The HD Hex series motors and gearboxes all features integrated encoders and power that plug right into your REV Expansion Hub or Control Hub. Our gearboxes all feature a 5mm hex output shaft makes it easy to...

Aluminum Servo Arm that is compatible with the REV Smart Robot Servo. Lightweight and strong, this arm is best utilized under high and low torque applications. Specifications Material: 6061 Aluminum CAD & Drawings SKU-STP REV-41-1820...

These are the same inserts that are included with the Through Bore Encoder.  Specifications Weight(s):  3/8in Hex: 23.5g (0.051lbs) 5mm Hex: 24.0g (0.052lbs) 1/4in Round: 24.0g (0.052lbs) Kit Contents QTY 1 - 3/8in Hex to 1/2in Hex...